|
|
Cable Detection
> P.A.C.T
TOM KAT-2 Locator + SIGEN-2 Signal Generator
TOMKAT-2 Locator
The TOMKAT 2 Cable and Pipe Locator is a full function industry standard pipe and cable locator designed and manufactured by PACT.
Better in design, the TOMKAT 2 is rugged, lightweight and packed full of features including a detachable speaker that can be held close to the ear for use in noisy environments.
Fingertip controls allow for adjustment to the sensitivity control and enabled rapid switching between the TOMKATS three operating modes.
The TOMKAT 2 is used to assist in the location of buried pipes and cables to a depth of 3 meters and offers three modes of location.
The TOMKAT 2 Cable Locator is used to assist in the location of buried pipes and cables to a depth of 3 meters and offers three modes of location.
POWER MODE
Locates live cables radiating a detachable signal.
RADIO MODE
Locates buried metallic conductors carrying a detachable vlf signal.
GENERATOR MODE
Locates buried metallic conductors carrying a detachable signal by induction or connection using the signal generator.
| DESCRIPTION |
TOMKAT 2 Cable Locator, used to locate buried cables & pipes |
| Technical Specification |
Technical & all other specification subject to change without notice |
| On/Off Switch |
Micro Switch |
| Mode selector |
|
| Power Mode |
Used to locate live cables carrying a detectable signal |
| Radio Mode |
Used to locate re-radiated radio signals |
| Generator Mode |
Used to locate conductors carrying a signal supplied by the signal generator |
| Sensitivity Control |
Used to pinpoint the location of buried conductors |
| Speaker Assembly |
An audible signal output via the waterproof detachable speaker assembly |
| Batteries |
8 x AA alkaline supplied fitted typical battery life 50 hours intermittent use. |
| Operating Temperature |
-20C to + 50C |
| Location Accuracy |
+ or - 10% of depth |
| Location depth (typically) |
Power mode 3 meters in good conditions 2 meters in poor conditions |
| Radio mode 2 meters in good conditions 1 meter in poor conditions |
| Generator mode 3 meters in good conditions 2 meters in poor conditions |
| Frequency |
Power mode 50-3kHz |
| Radio mode 15-30kHz |
Sigen -2
The SIGEN 2 works in conjunction with the TOMKAT 2 locator.
There are two ways in which the SIGEN 2 operates the first is by applying a signal by induction, the second is by direct connection.
To locate buried services the Sigen 2 signal generator is by far the best tool for the job. South Survey recommend the use of the Sigen 2 in conjunction with the Tomkat 2 Cable Locator and Pipe Locator.
Induction mode:-
To use in Induction mode, simply stand the Sigen 2 on the ground and turn the orange mode selector to the induction position.
Direct Connection:-
To operate the Sigen 2 in Direct Connection mode, simply connect the Sigen 2 to the service you wish to trace using the appropriate connection leads, select the connection mode on the Sigen 2, select the generator mode on the TOMCAT and trace the service.
It is advisable to always use "Connection Mode" whenever possible as this is by far the best way to trace and identify buried conductors.
| DESCRIPTION |
Signal Generator used in conjunction with the TOMCAT Cable Locator. |
| Technical Specification |
Technical & all other specification subject to change without notice |
| Off |
Transmitter is turned off in this position |
| Induction mode |
33 kHz pulsed |
| Connection mode |
33 kHz pulsed |
| Protection |
Isolation transformer allows direct connection via a 3 pin plug connector to mains supply |
| Power output |
120mw |
| Audio induction mode |
Audible pulsed tone |
| Audio connection mode |
Audible pulsed tone |
| Audio on/off |
Audible pulsed tone with distinct tone change confirms a good connection is made |
| Batteries |
8 x AA alkaline supplied fitted typical battery life 40 hours continuos use. |
| Operating Temperature |
-20C to + 50C |
| Compatibility |
Will work with all locators receiving a 33kHz signal |
| Accessories |
Supplied with earth stake connection leads & 3 pin plug connector. |
| Mains Connection |
3 pin plug connector allows direct connection to live mains via a 3 pin socket |
| Construction |
Moulded from high impact ABS weatherproof to IP54 CE tested |
| Dimensions |
285mm x 185mm x 195mm |
| Shipping Box Size |
305mm x 205mm x 215mm |
| E M C Testing |
EN55014 |
| Weight |
2.5kg |
Features Include
• 3 Position mode selector switch.
• Compact robust reliable construction.
• Operates on 8 x AA alkaline batteries.
• Supplied as standard complete with 3-pin plug connector, direct connection leads and earth stake. | Price: £856.50 £620.00
Back to Sitemap
> Cable Detection
> P.A.C.T
|
|
