Back to Homepage > Inspection & Detection > Moisture Meters > Tramex Moisture Meters

Complete Moisture & Humidity Meter (MRH III Kit)

The MRH Kit is a complete package for Moisture and Humidity measurement of the Building Envelope, incorporating 3 modes of operation.

Industry

  • Wood,
  • Flooring,
  • Indoor Air Quality,
  • Water Restoration,
  • Pest Control,
  • Inspection/Surveying.

Material

  • Wood,
  • Plaster,
  • Brick,
  • Plasterboard (drywall),
  • Roofing (membranes and insulation),
  • Porcelain or Ceramic tile,
  • Drywall,
  • Carpet,
  • Vinyl Flooring,
  • VCT tile,
  • Floor Laminates,
  • Wall Coverings.

Contents

  • Digital Hand-Held Non-Destructive Moisture Meter (MRH)
    • The MRH is a digital version of the Tramex Moisture Encounter Plus (MEP) hand held electronic impedance moisture metre. It operates on the principle of non-destructive impedance measurements. Parallel co-planar electrodes are mounted on the base which, during operation, transmits a low-frequency signal into the material under test. To carry out moisture test simply press the MRH firmly against the surface being tested and take a reading. There is no surface damage and the reading is immediate. The MRH has 5 different measurement scales: Wood, Roofing, Masonry, Drywall and Laminate.
  • Plug-In Hand Probe
    • Pin Probe mode is extremely easy to use, simply select the Pin Probe using the ► key on the MRH instrument insert either the Tramex Hand probe or Hammer Probe directly into the socket at the top of the instrument. The pin probe gives accurate readings in 0.1% increments over the entire measurement range. Readings are displayed on the LCD display on the MRH. The Pin Probe offers a most practical and accurate way of determining that wood is at the correct moisture level for its intended use, providing to be a vital tool for good quality control of wood flooring and other wood applications.
  • Infrared Surface Thermometer
  • Plug-in RH Probe
    • When the Tramex RH Probe is plugged into the MRH, it automatically changes to Hygrometer Mode. The Tramex RH Probe provides the ideal solution for measurements of humidity, temperature and dew-point in structural materials such as concrete flooring, walls etc. as well as the environmental conditions within the building or structure. Humidity readings are displayed in both percentage Relative Humidity (%RH) and mixing ratio (grains/lbs. or grams/Kg). The solid-state capacitive sensor in the RH probes gives accurate, fast results. Allows testing of concrete slabs using the In situ (ASTM F 2170) or RH Hood (ASTM 2420; BS 5325; BS 8203) methods.
  • Hammer Probe (Optional Extra - please contact us for details and costs).

Features

Digital, Non-Destructive Moisture Meter. Plug in Wood Probe.Plug in Humidity Probe for Relative Humidity, Temperature,Dew Point and Mixing Ratio readings.Specific Gravity adjustment for most Wood Species Deep signal penetration up to over 1" into the materials being tested without the need to damage the surface.External Rubber electrodes make direct contact with the material being tested for best sensitivity and repeatability.Wide range of readings for Wood of 5% to 30% and 0 to 100Comparative for all other materials.Large, Clear, Easy to read Display.Hold Function enables user to "Freeze" the reading. Useful for taking readings when the meter face is not visible.Switch-able "On" or "Off" Audio Warning tone. Automatic Power Cut-off switches "Off" when not in use. Automatic Default to last user setting when switched back on. Battery operated (supplied). 

Price £630.00 (£756.00 inc VAT)